Function

Using the vrrp mode commond, you can enable the vrrp mode.

Using the undo vrrp mode commond, you can disable the vrrp mode.

Format

vrrp mode
undo vrrp mode

Parameters

None

Views

System view

Default Level

2: Configuration level 

Usage Guidelines

By default, the VRRP mode is disabled; that is, the VRRP function can only be used together with HRP commands for dual-system hot backup.

After the VRRP mode is configured, only the commands for the VRRP function, but not HRP commands, are available.

If commands for dual-system hot backup (with HRP) are configured before the VRRP mode is enabled, you need to manually cancel the previous configuration to use the VRRP function independently.

Example

# Enable the vrrp mode.

<sysname> system-view
[sysname] vrrp mode

Please Cancle the Configration about HRP

It will allow you to enable VRRP in Huawei Firewall!

Thank you!

Useful post

Posted by Arafath at 2016-08-28 04:11 Useful post

Thank you.
If you have any queries concerning this topic please do let me know.
Thank you!