Question:

Rogeu ONU is one of the most important case in GPON, but when have problems with rogeu ONU, most of ONU in that pon port have problems, still have power but no internet. the state of ONU is continus dying gass or los or synchronizing...

Answer:

- We must enable the rogue onu characterics in OLT

- When have rogue, it will be alarm on U2000 the ONU have be rogue, so we must shutdown that ONU and request to change another ONU

- All the service will be ok after change

good infomation ,i already do many case like this,'thanks.

Agree with you

During the locating process, all services of ONTs under a PON port will be interrupted. Therefore, it is recommended that you disable automatic detection (system default configuration).

Add related command:
1. Run the anti-rogueont autodetect command to enable the function of automatically detecting continuous-mode rogue ONTs.
2. Run the ont reset command or the ont deactivate command to reset or deactivate ONTs under the PON port one by one.

More detail see: http://support.huawei.com/hdx/hd ... 20Rogue%20ONT〈=en

Thanks for sharing .....It's useful

Helpful.....

Good information .....

Posted by Babala at 2016-09-01 21:25 Agree with youDuring the locating process, all services of ONTs under a PON port will be interrupt ...

Thank you.