Guys, Please like and comments on the following O&M case, would be appreciated for valuable comments, or any recommendation.




[O&M Master] R_LOF alarm and BEFFEC_EXC warnings on LWF Board (1)
http://support.huawei.com/huaweiconnect/thread-353883.html


[O&M Master] The OTU_LOF Alarm is Reporting on the OTU at the downstream station.
http://support.huawei.com/huaweiconnect/thread-353991.html


[O&M Master] High Ambient Temperature causes the SCC board on the OptiX OSN 8800 repeatedly reports COMMUN_FAIL Alarms
http://support.huawei.com/huaweiconnect/thread-353989.html


FAQ-What is Optical Doctor System (OD) ?
http://support.huawei.com/huaweiconnect/thread-353671.html


[O&M Master] Bit Error Alarm (BEFFEC_EXC) Is Generated when optical power gets close to the threshold.
http://support.huawei.com/huaweiconnect/thread-353999.html


[O&M Master] Fault occur due to incorrect connection between Raman amplifier and ODF.
http://support.huawei.com/huaweiconnect/thread-353995.html


[O&M Master] R_LOF alarm and BEFFEC warnings on LWF board.
http://support.huawei.com/huaweiconnect/thread-353673.html


[O&M Master] FAQ-How to Distinguish Between G.653 Fibers and G.655 Fibers in Fiber Measurement
http://support.huawei.com/huaweiconnect/thread-353687.html


[O&M Master] Abnormal Decline in Optical power
http://support.huawei.com/huaweiconnect/thread-353699.html

Thanks dear

Posted by faheem180 at 2016-08-28 21:59 Guys, Please like and comments on the following O&M case, would be appreciated for valuable comments ...

Its all experience, what shared is what experienced while on-site, on-NMS, or while deployment of network.

Too long question, need to summary,