Recording TL1 User Logs

Solution

To enable the log function of the TL1 NBI, do as follows:

1.         Double-click usercfgtool.bat in \U2000\client\tools\usercfgtool\.

2.         In the dialog box that is displayed, select the database type, enter the IP address of the U2000 server, port ID, database user, and database password, and click OK.

3.         Click Filter in the upper right corner. In the dialog box that is displayed, set Config Name to TL1_USEROPERLOG_SWITCH, and click OK.

4.         Double-click the parameter and modify its value in the dialog box that is displayed.

When TL1_USEROPERLOG_SWITCH is 0, user operation logs will not be recorded.

When TL1_USEROPERLOG_SWITCH is 1, user operation logs will be recorded.

5.         Log in to the System Monitor client and restart the Tl1NBiDm process.