MA5800T and MA5600T cannot use the same boards.

MA5800 can not use the boards of MA5600T

NO, MA5800 CAN NOT USE BOARDS OF MA5600T.

MA5800T and MA5600T cannot use the same boards

MA5800 cannot use the boards of MA5600T

No MA5800T can not use MA5600T Board

NO, MA5800 CAN NOT USE BOARDS OF MA5600T...

MA5600T board can't be use in MA5800.

MA5600T boards can't be used in MA5800.

Guys, Please like and comments on the following O&M case, would be appreciated for valuable comments, or any recommendation.


[O&M Master] R_LOF alarm and BEFFEC_EXC warnings on LWF Board (1)
http://support.huawei.com/huaweiconnect/thread-353883.html


[O&M Master] The OTU_LOF Alarm is Reporting on the OTU at the downstream station.
http://support.huawei.com/huaweiconnect/thread-353991.html


[O&M Master] High Ambient Temperature causes the SCC board on the OptiX OSN 8800 repeatedly reports COMMUN_FAIL Alarms
http://support.huawei.com/huaweiconnect/thread-353989.html


FAQ-What is Optical Doctor System (OD) ?
http://support.huawei.com/huaweiconnect/thread-353671.html


[O&M Master] Bit Error Alarm (BEFFEC_EXC) Is Generated when optical power gets close to the threshold.
http://support.huawei.com/huaweiconnect/thread-353999.html


[O&M Master] Fault occur due to incorrect connection between Raman amplifier and ODF.
http://support.huawei.com/huaweiconnect/thread-353995.html


[O&M Master] R_LOF alarm and BEFFEC warnings on LWF board.
http://support.huawei.com/huaweiconnect/thread-353673.html


[O&M Master] FAQ-How to Distinguish Between G.653 Fibers and G.655 Fibers in Fiber Measurement
http://support.huawei.com/huaweiconnect/thread-353687.html


[O&M Master] Abnormal Decline in Optical power
http://support.huawei.com/huaweiconnect/thread-353699.html