maximum number VLANIF on S5700-52X-LI

新人帖[复制链接]
发表于 : 2017-12-1 09:31:48 最新回复:2017-12-05 06:12:11
216 4
anatolb   初出茅庐 

  求助帖: (已解决)
This post was last edited by user_2807393 at 2017-12-1 10:58. Hi
Today, I encountered a limitation on the maximum number of IP addresses on the interfaces of the S5700-52X-LI-AC switch - a maximum of 8 VLANIF. Is there any information in the datasheets about this, because in the characteristics on the vendor's website, I could not find anything about it?  
Also in datasheet  there is information about the RIP protocol switch support, but the switch of the "rip process-id" command does not know. What is the rake?
Is it possible to exceed this limit?Software: V200R008C00SPC500
  • x
  • 常规:

点评 回复

跳转到指定楼层
p00187531   版主  发表于 2017-12-4 09:56:25 已赞(2) 赞(2)

Dear friend,
Acturally, the S5700-LI as a maximum of 8 IP addresses for vlanif, it can be refered from the product manual, you can find it in the configuration for interface vlanif.
  • x
  • 常规:

点评 回复

user_2910347   管理员  发表于 2017-12-4 09:27:26 已赞(0) 赞(0)

waiting for help ,please
  • x
  • 常规:

点评 回复

anatolb   初出茅庐  发表于 2017-12-5 06:11:57 已赞(0) 赞(0)

Posted by p00187531 at 2017-12-4 09:56 Dear friend, Acturally, the S5700-LI as a maximum of 8 IP addresses for vlanif, it can be refer ...
So bad. Less than on the simplest L2-switch Cisco 2960X
  • x
  • 常规:

点评 回复

anatolb   初出茅庐  发表于 2017-12-5 06:12:11 已赞(0) 赞(0)

This post was last edited by user_2807393 at 2017-12-5 06:14.
  • x
  • 常规:

点评 回复

您需要登录后才可以回帖 登录 | 注册

如果附件按钮无法使用,请将Adobe Flash Player 更新到最新版本!
快速回复 返回顶部