Error Code 404 Is Displayed Because of Incorrect Configuration When Users Delete a Routing Network or Disassociate a Router on ServiceCenter in Non-SDN Scenarios

【Product�?
ServiceCenter

【Version�?
3.0, 3.0.SPC2, 3.0.5, 3.0.5.SP1, 3.0.5.SP2, 3.0.5.SP3, 3.0.5.SP5, 3.0.7, and 3.0.8

【Fault Type�?
Network fault

【Symptom�?
When a route network is deleted or the router is disassociated, 404 not found is displayed on the page.

【Fault Locating�?
In non-SDN scenarios, you must disable VPN so that you can delete a route network or disassociate a router. You can perform the following operations to check advanced cloud resource pool configurations:
Step 1 Log in to ServiceCenter as the system administrator.
Step 2 Choose Cloud Resource > Cloud Resource Pool.
Step 3 Click More and select Advanced Settings.
Step 4 Check whether Not supported is selected for VPN.

【Root Cause�?
In network automation capability configurations in non-SDN scenarios, if you configure that the system supports VPN, you will fail to delete a route network or disassociate a router.

【Solution�?
Step 1 Log in to ServiceCenter as the system administrator.
Step 2 Choose Cloud Resource > Cloud Resource Pool.
Step 3 Click More and select Advanced Settings.
Step 4 Check whether Not supported is selected for VPN.

----End

Scroll to top