how to deal with Client Process on the Host Configuration Channel Module Is Abnormal alarm on FusionCompute V1R5C00 version

This alarm is generated when the system detects that the client process on the host configuration channel module has stopped or is abnormal.

This alarm is cleared when the client process on the host configuration channel module is running properly.
Identify the IP address of the host for which the alarm is generated.

On the FusionCompute portal, click Monitoring, and choose Alarm in the navigation tree on the left. On the Alarm page, locate the row that contains the alarm and click the name in the Alarm Object column.
The Computing Pool page is displayed.

On the Summary page in the right pane, make a note of the host IP address.
Restart the client process on the configuration channel module of the host.

Use PuTTY to log in to the host.
Ensure that the management IP address and username gandalf are used to establish the connection.

Run the following command and enter the password of user root to switch to user root:

su - root


Run the following command to restart the client process:

service cmad restart

NOTE:
During the restart, the client services on the configuration channel module may be temporarily interrupted.


Run the following command to check the process status:
service cmad status

Check whether the following information is displayed:

Checking for service cma: running

If yes, go to Step 8.
If no, go to Step 9.

After 3 or 4 minutes, switch to the Alarm page and check whether the alarm is cleared.

Scroll to top