how to deal with NTP Clock Source Is Not Configured for a VRM alarm on FusionCompute V1R5C00 version

This alarm is generated when the system detects that the Network Time Protocol (NTP) clock source is not configured for a Virtualization Resource Management (VRM) node.

This alarm is cleared when the NTP clock source is configured for the VRM
On FusionCompute, choose System > System Configuration.

The System Configuration page is displayed.


In the navigation tree on the left, choose Time Management.

On the Time Management page displayed, check whether the NTP clock source is configured for the site.



If yes, go to Step 5.
If no, go to Step 3.

On the Time Management page, set an address for the NTP server, set Synchronization intervals (s), and click save. In the dialog box that is displayed, click OK.

NOTE:
You are advised to configure an external NTP clock source first. If no external NTP clock source exists, configure the clock source as the VRM host when the VRM is deployed on a VM or the VRM which is deployed on a server.

After 5 or 6 minutes, check whether the alarm is cleared.

Scroll to top