how to deal with System Timing Service Process on the VRM Is Abnormal alarm on FusionCompute V1R5C00 version

This alarm is generated when the system detects that the system timing service process on the Virtualization Resource Management (VRM) node has stopped or is abnormal.

The alarm is cleared when the system timing service process of the VRM becomes normal.
Restart the system timing service process.

On FusionCompute, choose Monitoring > Alarm. On the Alarm page, click the alarm object name.
The Service and Management Node page is displayed.

On the Service and Management Node page, view the management node information and obtain the management IP address of the alarm object viewed in Step 1.
Use PuTTY to log in to the node.
Ensure that the management IP address and username gandalf are used to establish the connection.

Run the following command and enter the password of user root to switch to user root:

su - root


Run the following command to restart the process:

service cron restart


Run the following command to check the process status:
service cron status

Check whether the command output is as follows:

Checking for Cron: running

If yes, go to Step 8.
If no, go to Step 11.

After 2 or 3 minutes, check whether the alarm is cleared.

If yes, no further action is required.
If no, go to Step 9.

Run the following command to check the status of the system timing service process:
service cron status

Check whether the following information is displayed:

Checking for Cron: running

Scroll to top