how to deal with Clock Synchronization Process on the VRM Is Abnormal alarm on FusionCompute V1R5C00 version

This alarm is generated when the system detects that the clock synchronization process on the Virtualization Resource Management (VRM) node has stopped or is abnormal.

This alarm is cleared when the clock synchronization process on the VRM node becomes normal.
Restart the clock synchronization process.

On FusionCompute, choose Monitoring > Alarm. On the Alarm page, click the alarm object name.
The Service and Management Node page is displayed.

On the Service and Management Node page, view the management node information and obtain the management IP address of the alarm object viewed in Step 1.
Use PuTTY to log in to the node.
Ensure that the management IP address and username gandalf are used to establish the connection.

Run the following command and enter the password of user root to switch to user root:

su - root


Run the following command to restart the process:

service ntp restart


Run the following command to check the process status:
service ntp status

Check whether the command output is as follows:

remote refid st t when poll reach delay offset jitter
==============================================================================
*LOCAL(0) .LOCL. 10 l 19 64 377 0.000 0.000 0.001

Checking for network time protocol daemon (NTPD): running

If yes, go to Step 8.
If no, go to Step 11.

After 2 or 3 minutes, check whether the alarm is cleared.

If yes, no further action is required.
If no, go to Step 9.

Run the following command to check the process status:
service ntp status

Check whether the following information is displayed, containing Checking for network time protocol daemon (NTPD): running
remote refid st t when poll reach delay offset jitter
==============================================================================
*LOCAL(0) .LOCL. 10 l 19 64 377 0.000 0.000 0.001

Checking for network time protocol daemon (NTPD): running

Scroll to top