How to deal with Inconsistent Data in VRM Internal Modules alarm on FusionCompute V1R5C00 version

This alarm is generated when inconsistent data is detected in the internal modules of the Virtualization Resource Management (VRM) node. This alarm is cleared after the VRM is restarted.
Use PuTTY to log in to the active VRM node.
Ensure that the management plane floating IP address and username gandalf are used to establish the connection.

Run the following command and enter the password of user root to switch to the user root:
su - root

Run the following command to disable logout on timeout:
TMOUT=0

Run the following command to restart the VRM process:
service vrmd restart

NOTICE:
Restarting the VRM process may interrupt running services. For example, the current operation may fail.

After 3 or 4 minutes, switch to the Alarm page and check whether the alarm is cleared.

If yes, no further action is required.
If no, go to Step 6.

Log in to the faulty VRM node.
For details, see Step 1.

Run the following command to check the process status:
service vrmd status

Check whether the following information is displayed:

Checking for service vrm running

Scroll to top