Method used to configure dual-screen displays for virtual desktops

The procedure for configuring dual-screen displays for virtual desktops is as follows:
Prerequisites: Two monitors, a dual-screen cable, and a monitor cable
1. Use the dual-screen cable to connect the TC to the monitors.
2. On the TC login page, choose Start > Control Center > Display.
3. On the Settings tab page, deselect Optimum settings, set Display Mode to Extend, and select VGA for Primary Monitor.
4. On the DVI and VGA tabs, adjust Resolution and Refresh Rate so that their values are the same. For example, a 22-inch monitor is generally set to 1680 x 1050).
5. Contact the administrator to enable the dual-screen display policy for your VM in the management system.

Other related questions:
Methods used to perform dual-screen tests
Does Workspace Support Dual-Screen Display?
If you have more questions, you can seek help from following ways:
To iKnow To Live Chat To Google
Scroll to top