Upgrade of the FusionCloud desktop solution

The FusionCloud desktop system can be upgraded from an earlier version to a newer version in cutover and upgrade modes:
1. Cutover: Perform cutover from the Citrix version to the HDP version, and then upgrade the HDP version.
The upgrade paths are as follows:
R2C01SPC100 > R2C01SPC200 > R3C00SPC10X > R5C10SPC200 > R5C10SPC20X > R5C20SPC20X
R2C00SPC200 > R2C01SPC200 > R3C00SPC10X > R5C10SPC200 > R5C10SPC20X > R5C20SPC20X
R2C01SPC30X > R3C00SPC10X > R5C10SPC200 > R5C10SPC20X > R5C20SPC20X
2. Upgrade: Upgrade directly HDP from an earlier version to a newer version.
The upgrade paths are as follows:
R5C10SPC100 > R5C20SPC20X
R5C10SPC20X > R5C20SPC20X
R5C20 > R5C20SPC20X
If you have any upgrade requirements, contact the project coordinator for the specific operation process.

Scroll to top