Configuring the DHCP Option 43 field on an AC

Perform the following operations to configure the DHCP Option 43 field on an AC that functions as a DHCP server:
1. Run the system-view command to enter the system view.
2. Run the dhcp enable command to enable the DHCP function.
3. Run the ip pool ip-pool-name command to enter the global address pool view.
4. Run the option 43 sub-option 2 ip-address ip-address &<1-8> command to set the DHCP Option 43 field to the IP addresses of the active and standby ACs.

Scroll to top