Configure 2.4 GHz and 5 GHz radios

Configure 2.4 GHz and 5 GHz radios.
In most cases, wlan-radio 0 or radio 0 indicates the 2.4 GHz radio, and wlan-radio 1 or radio 1 indicates the 5 GHz radio.
When configuring 2.4 GHz and 5 GHz radios, bind the corresponding radio profiles and service sets.
To switch or disable a radio, delete the radio profile and service set bound to the radio.
Note:
1. For Fat APs:
- Radio profiles: must be added for 2.4 GHz and 5 GHz radios in V200R003, and network types must be selected accordingly. However, this process is not required in V200R005 and later versions.
- Service sets: must be created for 2.4 GHz and 5 GHz radios, and be invoked by wireless networks separately.
2. For ACs:
- Radio profiles: must be added for 2.4 GHz and 5 GHz radios in V200R003, and network types must be selected accordingly. However, this process is not required in V200R005 and later versions.
- Different radios can reuse a service set.
3. The AP2010DN supports only one radio. Change the radio frequency by running the ap id radio 0 command.

Scroll to top