Function of the protocol inbound all command on a WLAN device

For a WLAN device, the protocol inbound command is used to specify the supported login protocol for the VTY user interface. The command format is as follows:
protocol inbound { all | ssh | telnet }
all indicates that all protocols are supported, including SSH and Telnet.
SSH indicates that only the SSH protocol is supported.
Telnet indicates that only the Telnet protocol is supported.
When you use this command to configure the supported protocol of a user interface to SSH, you must configure the authentication mode to authentication-mode aaa to ensure that the device can be logged in successfully. If the authentication mode is configured to password, the configuration of protocol inbound ssh will fail.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat To Google
Scroll to top