Configuring hybrid interfaces on WLAN devices

The following example describes how to configure a hybrid interface on a WLAN device:
- A hybrid interface can connect to either a user device or a switch.
[HUAWEI]vlan 2 //Create a VLAN.
[HUAWEI-vlan2]quit
[HUAWEI]interface gigabitethernet0/0/2
[HUAWEI-GigabitEthernet0/0/2]port link-type hybrid //Set the interface type to hybrid.
[HUAWEI-GigabitEthernet0/0/2]port hybrid untagged vlan 2 //Configure the interface to allow packets from VLAN 2 to pass through in untagged mode.
[HUAWEI-GigabitEthernet0/0/2]port hybrid pvid vlan 2 //(Optional) Specify VLAN 2 as the default VLAN of the interface (default: VLAN 1).
[HUAWEI-GigabitEthernet0/0/2]port hybrid tagged vlan 3 //Configure the interface to allow packets from VLAN 3 to pass through in tagged mode.

Scroll to top