Packet board configuration for slave OptiX OSN 8800 subracks

At present, packet boards can be used only in an independent subrack, but not in the master or slave subrack when subracks are configured in the master-slave mode.
When packet boards are configured in an OptiX OSN 8800 T32 subrack, the cross-connect board must be TN52UXCH or TN52UXCM, and the system control board must be TN52SCC in the subrack.
When packet boards are configured in an OptiX OSN 8800 T16 subrack, the cross-connect board must be TN16UXCM in the subrack.

Scroll to top