ODUk SNCP service configuration procedure

ODUk SNCP service creation by trail:
(1) Configure TCM overheads of the line board.
(2) Set board parameters.
(3) Create a client trail.
(4) Create ODUk SNCP protection.
(5) Check ODUk SNCP protection status.
ODUk SNCP service creation by single site:
1. Configure ODUk SNCP protection at the transmit site.
(1) Configure OTN overheads of the line board.
(2) Set board parameters.
(3) Create ODUk SNCP protection.
2. (Optional) Configure an electrical regeneration site.
(1) Set board parameters.
(2) Create bidirectional electrical cross-connection services.
3. Configure ODUk SNCP protection of the receive site.
4. Check ODUk SNCP protection status.

Scroll to top