How to enable the web function on an AR router

The methods of enabling the web function on an AR router are as follows:

Method 1: Default web login
1. Connect a PC to the router over the management interface through a network cable.
2. Configure an IP address for the PC. Configurable network segment: 192.168.1.2~192.168.1.254.
3. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page.
4. Enter login information.
5. Configure the router through the web NMS page.

Note: If you cannot enter the web NMS page, the software version you use does not support the default web login method. Please try the following method:

Method 2: Non-default web login
1. Connect a PC to the router over the CON/AUX interface through a console configuration cable.
2. Enable the terminal emulation software on the PC, create a connection, and set an interface for the connection and other communication parameters.
3. Press Enter until the following information is displayed to remind users of configuring a verification code.
4. Connect a PC to the router over the management interface through a network cable.
5. Configure an IP address for the router for management.
6. Enable the web service.
7. Configure an HTTPS user and a user level.
8. Configure an IP address for the PC.
9. Open a browser, enter the URL "https://192.168.1.1" in the address bar, and click Enter to enter the user login page.
10. Configure the router through the web NMS page.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat To Google
Scroll to top