How to configure unknown unicast traffic suppression on an interface of a CE series switch

Excessive unknown unicast packets on inbound and outbound interfaces of a switch will cause broadcast storms. To limit the rate of unknown unicast packets on an interface, you can configure unknown unicast traffic suppression on the interface.
For example, you can configure unknown unicast traffic suppression on 10GE1/0/1 and set the maximum rate of unknown unicast packets on 10GE1/0/1 to 100 kbit/s.
<HUAWEI> system-view
[~HUAWEI] interface 10ge 1/0/1
[~HUAWEI-10GE1/0/1] storm suppression unknown-unicast cir 100
[*HUAWEI-10GE1/0/1] commit

Scroll to top