Can an S series switch function as the NTP server

The following is an example of configuring the NTP server function in broadcast mode.
[HUAWEI] ntp-service refclock-master 3 //Configure the local clock as the NTP master clock.
[HUAWEI] undo ntp-service server disable //Enable the IPv4 NTP server function.
[HUAWEI] interface vlanif 100
[HUAWEI-Vlanif100] ip address 10.1.1.1 24 //Configure an IP address for the server.
[HUAWEI-Vlanif100] ntp-service broadcast-server //Configure the local switch as the NTP broadcast server.

Scroll to top