Does an S series modular switch support inter-card redirection

S series modular switches support inter-card redirection for incoming traffic. A switch can redirect flows that meet certain conditions to the CPU, other interfaces, or other IP addresses.
Do as follows to configure the redirection function:
1. Configure an ACL rule.
[HUAWEI] acl number 3000
[HUAWEI-acl-adv-3000] rule 0 permit ip source 192.168.1.1 0
[HUAWEI-acl-adv-3000] quit
2. Configure a traffic classifier.
[HUAWEI] traffic classifier 3000
[HUAWEI-classifier-3000] if-match acl 3000
[HUAWEI-classifier-3000] quit
3. Configure a traffic behavior.
[HUAWEI] traffic behavior 3000
[HUAWEI-behavior-3000] redirect interface GigabitEthernet 4/0/0
[HUAWEI-behavior-3000] quit
4. Configure a traffic policy.
[HUAWEI] traffic policy 3000
[HUAWEI-trafficpolicy-3000] classifier 3000 behavior 3000
[HUAWEI-trafficpolicy-3000] quit
5. Apply the traffic policy to an interface.
[HUAWEI] interface GigabitEthernet 3/0/0
[HUAWEI-GigabitEthernet3/0/0] traffic-policy 3000 inbound
[HUAWEI-GigabitEthernet3/0/0] quit

Scroll to top