Can I apply a traffic policy to an interface on an S series switch

For S series switches (except the S1700), a traffic policy can be applied to an interface.
The application procedure is as follows:
1. Run the system-view command to enter the system view.
2. Run the interface interface-type interface-number[.subinterface-number ] command to enter the interface or sub-interface view.
3 Run the traffic-policy policy-name { inbound | outbound } command to apply a traffic policy in the interface or sub-interface view.
Note: A traffic policy can be applied to a sub-interface only when the switch or card model supports sub-interfaces.
A traffic policy can only be applied to one direction on an interface, but can be applied to different directions on different interfaces. After a traffic policy is applied to an interface, the system performs traffic policing for all the incoming or outgoing packets that match traffic classification rules on the interface.
Note: MQC cannot be configured on the S2700SI.

Other related questions:
Can I apply a traffic policy to an interface on a CE series switch
If you have more questions, you can seek help from following ways:
To iKnow To Live Chat To Google
Scroll to top