Method to configure static DHCP binding on S series switches

Static DHCP binding allows the switch to allocate fixed IP addresses to user terminals with fixed MAC addresses. Assume that an S series switch excluding the S1700 needs to allocate the fixed IP address of 10.10.10.10 to the client with the MAC address of dcd2-fc96-e4c0. The configuration method is as follows:
- Based on the global address pool:
[HUAWEI] ip pool 1 //Address segments have been configured in the address pool.
[HUAWEI-ip-pool-1] static-bind ip-address 10.10.10.10 mac-address dcd2-fc96-e4c0
- Based on the interface address pool:
[HUAWEI] interface vlanif 10 //An IP address has been assigned to the interface.
[HUAWEI-Vlanif10] dhcp server static-bind ip-address 10.10.10.10 mac-address dcd2-fc96-e4c0
Note: The configured IP address cannot be the IP address that has been assigned. If the system displays a message indicating that the IP address has been assigned, run the reset ip pool { interface pool-name | name ip-pool-name } { start-ip-address [ end-ip-address ] | all | conflict | expired | used } command in the user view to manually reclaim IP addresses in the address pool.

Scroll to top