Does the switch Eth-Trunk port support the enhanced load balancing mode

In the enhanced mode, the load balancing can be implemented based on the packet type.

In V100R006 and earlier versions, the switches do not support this configuration. In V200R001, only the S5700HI and S5710EI support this configuration. In V200R200 and later versions, the S5700HI, S5710HI, and S5710EI support this configuration. The key configuration commands are as follows:

1. Run the load-balance-profile profile-name command to create the enhanced load balancing template and go to the template view. The load balancing mode can be configured for L2 packets, IPV4 packets, IPV6 packets, or MPLS packets.

2. Go to the Eth-Trunk port view, and run load-balance enhanced profile profile-name to use the enhanced load balancing mode for the Eth-Trunk.

Scroll to top