Disable STP on the S1728GWR-4P switch

Disable STP on an S1728GWR-4P switch as follows:
Perform the following operations to disable STP globally on an S1728GWR-4P switch:
1. Choose Spanning Tree > STP.
2. Select Configure Global from the Step drop-down list box, and Configure from the Action drop-down list box.
3. Deselect Enabled in Spanning Tree.
4. Click Apply.

Perform the following operations to disable STP on an interface of an S1728GWR-4P switch:
1. Choose Spanning Tree > STP.
2. Select Configure Inter from the Step drop-down list box, and Configure from the Action drop-down list box.
3. Deselect Enabled in the Spanning Tree column of corresponding interfaces.
4. Click Apply.

Scroll to top