Method used to view an online L2TP user on the USG2000 and USG5000

The method used to view an online L2TP user on the USG2000 and USG5000 is as follows:

You can run the display access-user command to view an online user.
HRP_M[Slave-aaa] display access-user

Total users : 1
Wait authen-ack : 0
Authentication success : 1
Accounting ready : 1
Accounting state : 0
Wait leaving-flow-query : 0
Wait accounting-start : 0
Wait accounting-stop : 0
Wait authorization-client : 0
Wait authorization-server : 0

Domain-name Online-user

default : 1

The used CID table are :
0

To view specific user information, run the display access-user [ domain domain-name | ip-address ip-address | mac-address mac-address | user-id user-id | user-name user-name] command:
HRP_M[Slave-aaa] display access-user user-id 0

User access index : 0
State : Used
User name : jtq
User access VLAN/PVC : 0
User MAC : ffff-ffff-ffff
User IP address : 1.1.1.2
User access type : PPP
User authentication type : PPP authentication
Current authen method : Local authentication
Authen result : Success
Current author method : Local authorization
Author result : Success
Action flag : Idle
Authen state : Authed
Author state : Idle
Accounting method : No accounting
Accounting start time : 2008-03-15 06:09:39
Accounting state : Ready
ACL-number : 255
Priority : -
Up CAR enable : NO
Up average rate : 0(bps)
Up peak rate : 0(bps)
Down CAR enable : NO
Down average rate : 0(bps)
Down peak rate : 0(bps)
Up packets number(high,low) : (0,771)
Up bytes number(high,low) : (0,42360)
Down packets number(high,low) : (0,761)
Down bytes number(high,low) : (0,42616)

Scroll to top