Method used to bind an L2TP user and an IP address on the USG2000 and USG5000

The method used to bind an L2TP user and an IP address on the USG2000 and USG5000 is as follows:

You can bind an L2TP user and an IP address on the USG firewall only when the USG firewall serves as an LNS on the network.
[USG5500-aaa]local-user wutest ?
access-limit Access limit
acl-number Configure ACL number
ftp-directory Set user FTP directory permitted
idle-cut Configure idle cut
l2tp-ip Configure binding ip of l2tp for user/Select this parameter to bind the L2TP user and the IP address.
level Configure user privilege
password Indicate the password
service-type Service types for authorized users
state Activate/block the user(s)
valid-period Indicate user valid period
vpn-instance Specify a VPN-Instance

[USG5500-aaa]local-user wutest l2
[USG5500-aaa]local-user wutest l2tp-ip ?
X.X.X.X The ip of l2tp/Configure the IP address to be bound.

[USG5500-aaa]local-user wutest l2tp-ip 1.1.1.1

Scroll to top