Method for configuring HTTPS login to the web UI of the USG6000

You can configure the HTTPS login to the web UI as follows:
Note: If you only enable the web function by running web-manager enable but do not enable the HTTPS service by running web-manager security enable, you cannot log in to the device.
1. Networking requirement
Configure a local authentication administrator webadmin for the NGFW and require that the administrator use HTTPS to log in to the web UI.

2. Configuration roadmap
a. Configure the web service for the device and enable the HTTPS service on the interface to allow the administrator to use HTTPS to log in to the web UI.
b. Create an administrator.
3. Operation procedure
a. Enable the web service.
Enable HTTPS.
[NGFW] web-manager security enable port 8443
Configure the timeout period for the web service.
[NGFW] web-manager timeout 5
By default, the web service timeout period is 10 minutes.
(Optional) Configure automatic web UI lockout upon 5 consecutive administrator login failures.
By default, the web UI will be added to the blacklist for 10 minutes (cannot be modified) after 3 consecutive authentication failures.
[NGFW] firewall blacklist authentication-count login-failed 5
Configure the IP address on GigabitEthernet 1/0/3 and enable the HTTPS service.
[NGFW] interface GigabitEthernet 1/0/3
[NGFW-GigabitEthernet1/0/3] ip address
[NGFW-GigabitEthernet1/0/3] service-manage enable
[NGFW-GigabitEthernet1/0/3] service-manage https permit
[NGFW-GigabitEthernet1/0/3] quit
Add the interface to the security zone.
[NGFW] firewall zone trust
[NGFW-zone-trust] add interface GigabitEthernet1/0/3
[NGFW-zone-trust] quit
b. Create an administrator.
Create an administrator and bind a role to it.
[NGFW-aaa] manager-user webadmin
[NGFW-aaa-manager-user-webadmin] password
Enter Password:
Confirm Password:
[NGFW-aaa-manager-user-webadmin] service-type web
[NGFW-aaa-manager-user-webadmin] access-limit 10
[NGFW-aaa-manager-user-webadmin] level 3
[NGFW-aaa-manager-user-webadmin] quit
Log in to the NGFW on the administrator PC.
Open the browser on the PC and access, the IP address of the device to be logged in to.
On the login page, enter the administrator's user name and password, respectively webadmin and Myadmin@123, and click Enter to enter the web UI.

Other related questions:
Method for configuring HTTPS login to the web UI of the USG2000&5000
If you have more questions, you can seek help from following ways:
To iKnow To Live Chat To Google
Scroll to top