Configuring the VLANIF interface on the firewall

Configure the VLANIF interface on the USG as follows:
[FW] vlan 10
[FW-vlan-10] quit
[FW] interface Vlanif 10
[FW-Vlanif10] quit
[FW] interface GigabitEthernet 0/0/1
[FW-GigabitEthernet0/0/1] portswitch
[FW-GigabitEthernet0/0/1] port link-type trunk
[FW-GigabitEthernet0/0/1] port trunk permit vlan 10
[FW-GigabitEthernet0/0/1] quit

Scroll to top