Configuring smart DNS for a single server through the web UI of the USG6000

Configure smart DNS for a single server through the web UI as follows:
1. Choose Network > DNS > Smart DNS.
2. Select Enable of Smart DNS and click Apply.
3. In Smart DNS List, click Add.
4. Select Single-server when only one web server is deployed on the enterprise intranet in Scenario.
5. Enter the description of smart DNS in Description.
6. Enter the global IP address of the internal web server in DNS Reply Address.
7. In Traffic Distribution Mode, select Based on ISP egresses, Round Robin, or Weighted Round Robin as required.
8. Click OK.
9. Choose Policy > NAT Policy > Server Mapping.
10. In Server Mapping List, click Add.
11. In Add Address Mapping, configure server mapping.
12. Click OK.
13. Choose Network > Interface and configure sticky load balancing.

Scroll to top