How to Introduce Default Routes for USG2000 & USG2000 Series OSPF?

The USG2000 series configuration OSPF introduces the default route as follows:

1. Run the system-view command in the user view to enter the system view.

2. Run: ospf [process-id] The OSPF view is displayed.
3. Select the following configuration according to the actual situation.

If you want to redistribute the default route into the OSPF process, run the default-route-advertise [[all | permit] | cost type | type type | route-policy route-policy-name]

If you want to specify the default cost of the Type-3 summary LSA, run the default-route-advertise summary cost cost command. "

Scroll to top