Configuring OSPF to import default routes on the USG2000 series

Configure OSPF to import default routes on the USG2000 series as follows:

1. In the user view, run the system-view command to enter the system view.

2. Run the ospf [ process-id ] command to access the OSPF view.
3. Select the following configurations as required.

To import a default route to the OSPF process, run the default-route-advertise [ [ always | permit ] | cost cost | type type | route-policy route-policy-name ] * command.

To specify the default cost of Type-3 summary LSA, run the default-route-advertise summary cost cost command.

Scroll to top