How to configure the administrator level on the AR

If non-authentication is used, the administrator level is specified by using the user privilege level command in the VTY interface view.

If local authentication is used, the administrator level can be set in the following ways that are in descending order of priority:
1. Run the local-user privilege level command to configure the local user level.
2. Run the admin-user privilege level command to configure the administrator level in a domain.
3. Run the user privilege level command to configure the user level in VTY mode.

If remote authentication is used, the administrator level can be set in the following ways that are in descending order of priority:
1. Use the user level sent by an authentication server to the AR after authentication is succeessful.
2. Run the admin-user privilege level command to set the administrator level in a domain.
3. Run the user privilege level command to set the user level in VTY mode.

Scroll to top