What types of guide rails should I use for file engine nodes and what are the installation requirements?

Side support-type guide rails and adjustable guide rails are delivered with a 4 U file engine node. Such guide rails can be installed in the SC611-20 cabinet.
If you need to install adjustable guide rails in another model of cabinet, the following must be met:
? The cabinet size is consistent with that of the 19-inch (482.6 mm) IEC 60297 series.
? The distance between front and rear channels ranges from 690 mm to 770 mm.
? Holes on the channels can be either of the following:
? Square holes (side length �?9 mm)
? Round holes (diameter �?Ф 7 mm)
? The minimum horizontal distance in the cabinet cannot be less than 475 mm.

Scroll to top