What types of guide rails should I use for controller enclosures or disk enclosures and what are the installation requirements?

Bottom support-type guide rails and adjustable guide rails are delivered with 2 U and 4 U controller enclosures or disk enclosures. Such guide rails can be installed in the SC611-20 cabinet.
If you need to install adjustable guide rails in another model of cabinet, the following must be met:
? The cabinet size is consistent with that of the 19-inch (482.6 mm) IEC 60297 series. The open size is 450 mm.
? The distance between front and rear channels ranges from 600 mm to 900 mm.
? Holes on the channels can be either of the following:
? Square holes (side length �?9 mm)
? Round holes (diameter �?Ф 7 mm)
? The minimum horizontal distance in the cabinet cannot be less than 475 mm.

Scroll to top