How do I configure NQA on the AR router

The procedure for configuring NQA on the AR router is as follows:
1. Run the system-view command to enter the system view.
2. Run the nqa test-instance command to create an NQA test instance.
3. Run the test-type command to configure the type of the NQA test instance.
4. Configure mandatory parameters based on the type of the NQA test instance. (For the NQA test instance of ICMP, the destination IP address needs to be specified. For the NQA test instance of DHCP, the source interface for sending DHCP Request messages needs to be specified. For the NQA test instance of DNS, the destination domain name needs to be specified.
5. Configure optional parameters as needed, for example, test period and timeout interval.
6. Configure association. The NQA test instance can be associated with VRRP and static route.

Scroll to top