Method used to start and stop SNMP threads

You can start and stop SNMP threads as follows:
1. Fault location and rectification
a. The I2000 fails to obtain the management IP address.
b. Vulnerability scanning or other requirements
2. Solution
a. Query the SNMP thread.
Log in to the debug mode, go to the /OSM/snmp_agent/conf/ directory, and enter ./show_snmp.sh to query.
b. Stop the SNMP thread.
Enter ./stop_snmp.sh to query.
c. Start the SNMP thread.
Enter ./start_snmp.sh to query.
To query the SNMP thread and running status, refer to step a.

Scroll to top