Method used to initialize the password of an admin user

1. When S5000/S2600/S6800E V100R005 or S2600 V100R001/V100R002 storage systems are used, perform the following steps:
(1) Use the serial cable to connect the storage device and maintenance terminal.
(2) Run the ttermpro.exe program.
(3) Enter _super_admin following Hw login: and Hs login: and press Enter.
(4) Specify the password following Password and press Enter.
Note: If a password is required, contact Huawei R&D engineers.
(5) Run initpasswd to initialize the password of an admin user.
After the command is executed successfully, the password of the admin user is initialized to 123456.

2. When S5000 V100R001/V100R002 or S2000 series V100R001 storage systems are used, perform the following steps:
(1) Log in to OceanStor S5100 storage system and OceanSpace S5100 as the super user.
Note: If a password is required, contact Huawei R&D engineers.
(2) Go to the debug mode.
(3) Run passwd admin to change the password without providing the old password.

3. When S5000T V100R001 or S5000T V100R002 storage systems are used, perform the following steps:
(1) Use the serial cable to connect the storage device and maintenance terminal.
(2) Run the ttermpro.exe program.
(3) In the Hw login: and Hs login: text boxes, enter _super_admin and press Enter.
(4) In the text box next to Password, specify the password and press Enter.
Note: If a password is required, contact Huawei R&D engineers.
(5) Run initpasswd to initialize the password of an admin user.
After the command is executed successfully, the password of the admin user is initialized to Admin@storage.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat To Google
Scroll to top