Solution if an admin user has already logged in to the S2600 V100R001 storage array

Symptom
When a user attempts to log in to the S2600 V100R001 storage array as user admin, a message indicating that another user has already logged in to the storage array is displayed. However, in debug mode, if the user runs who, a message is displayed indicating that only the current user is logged in to the storage array.

Solution
1. Use PuTTY or SSH to log in to the storage array as user admin. If a message indicating that another user has logged in to the storage array, press Shift+9 to enter the debug mode.
2. In debug mode, run killall auth to stop the process and enter exit to exit from the debug mode.
3. Log in to the peer end and repeat step 2.
4. Enter the debug mode and run /OSM/bin/auth & to start the process in the background and enter exit to exit from the debug mode.
5. Log in to another controller and repeat step 4.
6. Ensure that the two controllers have exited from the storage array and log in to the storage array as user admin.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat To Google
Scroll to top