Configuring switches on a 10GE network for OceanStor 9000 V100R001C01

Procedure for configuring switches on a 10GE network for OceanStor 9000 V100R001C01:
1. Set switches CE6800-1 and CE6800-2 to the stack state.
2. Turn on the traffic control switches for the 10GE ports on switches CE6800-1 and CE6800-2.
3. Configure an IP address for port MEth0/0/0, and configure SNMP.
4. Configure switch S5700.For details, see OceanStor 9000 V100R001C01 Software Installation Guide 12 .

Scroll to top