Adjusting the dynamic front-end IP addresses of an OceanStor 9000's subnet

Procedure for adjusting the dynamic front-end IP addresses of an OceanStor 9000's subnet:
1. Log in to DeviceManager.
a. Choose Settings > Cluster Settings > InfoEqualizer > Subnet Management.
3. Configure a dynamic IP address for a subnet.
Note: An IP address from the IP address pool must be reassigned to a node that recovers from a fault. In case that the IP address pool has insufficient IP addresses, it is recommended that the number of dynamic IP addresses equal the number of ports connected to the front-end network.
a. Select a subnet for which you want to configure a dynamic IP address. In the IP address pool area, click Add.
b. Enter the planned IP address in the Add IP Address dialog box that is displayed and click OK.
c. The Result dialog box is displayed. Click Close. In the table under IP address pool, you can view the newly added IP address.

Scroll to top