How to configure a route through the web NMS on an AR router

To configure a static route, do as follows:
1. Choose IP Service > Route > Static Route Configuration. .
2. Click Create in the IPv4 Static Route Configuration Table or IPv6 Static Route Configuration Table according to requirements to enter the parameter configuration page.
3. Configure parameters one by one, and click OK to complete the configuration.

To configure a dynamic route, do as follows:
- Configure the OSPF function.
1. Choose IP Service > Route > Dynamic Route Configuration > OSPF to enter the OSPF List page.
2. Click Create, enter parameters, and click ok to create an OSPF process.
3. On the OSPF List page, select the new OSPF process, click Advanced at the right side, click the Basic or Advanced tab page, and modify the OSPF process parameters according to requirements.
- Configure the BGP function.
1. Choose IP Service > Route > Dynamic Route Configuration > BGP, configure parameters, and click Apply.
2. On the Peer Configuration List page, click Create, enter parameters, and click ok to create a BGP neighbor.

Other related questions:
How to query routing information through the web NMS on an AR router
If you have more questions, you can seek help from following ways:
To iKnow To Live Chat To Google
Scroll to top