RH2285 V2 hard disk

HDDs are hot-swappable and store data for the RH2285 V2. The RH2285 V2 supports the following HDD configurations:
1. Eight 2.5-inch SAS/SATA HDDs or SSDs
2. Twelve 3.5-inch SAS/SATA HDDs at the front and two 2.5-inch SAS/SATA HDDs at the rear
Note:
A customized 3.5-inch hard disk tray can be used to support twelve 2.5-inch hard disks at the front.
3. Twenty-four 2.5-inch SAS/SATA HDDs at the front and two 2.5-inch SAS/SATA HDDs at the rear

The RH2285 V2 with eight hard disks supports the following maximum storage capacities:
SAS HDD:7.2 TB
SATA HDD: 8 TB
SSD:4.8 TB
The RH2285 V2 with 14 hard disks supports the following maximum storage capacities:
SAS HDD:12.6 TB
SATA HDD: 38 TB
The RH2285 V2 with 26 hard disks supports the following maximum storage capacities:
SAS HDD: 23.4 TB
SATA HDD: 26 TB
SSD:14.4 TB
Note:
The maximum storage capacity of the server varies depending on the maximum capacity of a single hard disk.

The server supports RAID 0, 1, 10, 5, 50, 6, and 60. It supports power failure protection, RAID state migration, RAID configuration memory, self-diagnosis, and web-based configuration.
Note:
When you use an upgrade ROM, RAID is not supported.

The mainboard can be configured with a SAS card or SAS RAID controller card (with a maximum of 1 GB cache) to improve hard disk storage performance and ensure user data security. The RAID controller card does not occupy a standard PCIe slot, which improves system scalability.

Scroll to top