How do I modify the address range of the address pool on the AR router

The nat address-group command can be used to configure a NAT address pool. The undo nat address-group command deletes a NAT address pool.
To change the IP address range from 10.1.1.1-10.1.1.10 to 10.1.1.1-10.1.1.20, perform the following operations:
1. Delete the existing NAT address pool.
[Huawei] undo nat address-group 1
2. Configure the IP address range as 10.1.1.1-10.1.1.20.
[Huawei] nat address-group 1 10.1.1.1 10.1.1.20

Scroll to top