When prompted to configure NAT Server,AR router report ARP conflict or interface conflict ?

When configure NAT Server, if use the network interface IP address, there may be the following configuration error.
[AR2200-GigabitEthernet0/0/1] IP address 24
[AR2200-GigabitEthernet0/0/1] NAT protocol 80 global inside server
Error: The conflicts with or ARP interface address IP.

At this time, need to configure NAT server command when the network port IP address to current-interface, as follows:
[AR2200-GigabitEthernet0/0/1] NAT protocol 80 global inside current-interface server

Scroll to top