How to modify the router AR address pool address range?

AR router can configure the NAT address pool via the "NAT address-group" command. Delete the NAT address pool by executing the "undo NAT address-group" command.
If you need to modify the NAT address pool address range 10.1.1.1~10.1.1.10 to 10.1.1.1~10.1.1.20, the specific configuration is as follows:

1 first delete the existing NAT address pool
[Huawei] undo address-group NAT 1
2 configure the NAT address pool range of 10.1.1.1~10.1.1.20
[Huawei] NAT address-group 1 10.1.1.1 10.1.1.20

Scroll to top