[CrowdLabs_Issue 03] Command Finder

mmendoze  Jackeroo 
3 years 3 months ago
VERY GOOD INFO.... ;)
Loam  Junior 
3 years 2 months ago

Reply 43 #

Dear,

 In future, we will issue another new version for alarm, command searching on line. And they can be exported to excel table for more convenient work. And we will keep u posted:)

tipu_sultan  Medium 
3 years 3 months ago

Hi,


Three most common commands for me are :


display interface description

display ip routing-table vpn-instance <instance name> <route to be checked>

tracert -vpn-instance <instance name> -a <source interface> <destination to be traced>


Screenshot from online query tool is below. To check ospf link state database.



JNCADAHING  Junior 
3 years 5 months ago
SCREENSHOT:

This article contains more resources

You need to log in to download or view. No account?Register

x
JNCADAHING  Junior 
3 years 5 months ago
okechukwu.muodilim  Medium 
3 years 5 months ago
nikulay.pinto  Junior 
3 years 5 months ago

 

Three frequent command:

 

display ip interface [ interface-type [ interface-number ] ]

display ip interface brief [ interface[ interface-number ] ]

display vlan desc vlanid

 

 

Felipe  Platinum 
3 years 5 months ago

Screenshot:

Felipe  Platinum 
3 years 5 months ago

My three frequently used commands are:


1. display mpls te tunnel-interface

2. display mpls te tunnel path

3. display mpls te tunnel-interface failed


I used to run these commands in ATN910_V200R002C00.


Regards!

myawan  Senior 
3 years 5 months ago

Screenshot of my command:

 

 

5/8Page